luglugalugaaen |

sea nav gua

form

GET YOUR FREE QUOTE

We will contact you within 24 hours.

What Is The Valve

Time: 20-May 2025 | Source: I-FLOW| Share

What Is a Valve
A valve is a mechanical device used to start, stop, or regulate the flow of a fluid (liquid, gas, or slurry) through a pipeline or system. Valves can be operated manually, pneumatically, hydraulically, or electrically, depending on the system design and requirements.
10 Types of Valves & Their Functions
1. Gate Valve
Gate valves are designed for full on/off control. They are not suitable for throttling. Commonly used in water and oil pipelines, they offer minimal pressure loss when fully open and tight sealing when closed.
Best for: Isolation in clean service applications like water supply systems and oil & gas pipelines.
2. Globe Valve
Globe valves are ideal for throttling purposes. They offer excellent sealing and precise flow control due to their linear motion design.
Best for: Applications where flow needs to be adjusted frequently, such as cooling systems and fuel oil systems.
3. Ball Valve
Ball valves use a rotary ball with a bore to control flow. With a simple quarter-turn operation, they allow rapid shutoff and are durable under high-pressure conditions.
Best for: Shut-off and control in industrial, chemical, and petrochemical applications.
4. Butterfly Valve
Butterfly valves are compact and cost-effective. They consist of a rotating disc and are well-suited for large-diameter pipes and systems requiring low-pressure drops.
Best for: HVAC, water treatment, and fire protection systems.
5. Check Valve
Check valves are non-return valves that allow fluid to flow in only one direction, preventing backflow that could damage pumps or systems.
Best for: Pump discharge lines, wastewater systems, and process pipelines.
6. Pressure Relief Valve
These valves automatically release pressure when a system exceeds a predefined limit, protecting equipment and personnel from potential damage or danger.
Best for: Safety applications in boilers, pressure vessels, and gas systems.
7. Needle Valve
Needle valves enable fine control of flow rate with a slender, tapered point. Their precision makes them ideal for calibration.
Best for: Instrumentation, metering systems, and flow regulation in low-flow applications.
8. Diaphragm Valve
These valves use a flexible diaphragm to control flow. They are clean and corrosion-resistant, ideal for hygiene-critical systems.
Best for: Pharmaceutical, food processing, and corrosive fluid systems.
9. Plug Valve
Plug valves use a rotating plug with a hole to control flow. Known for their simplicity, they provide reliable shutoff in tough applications.
Best for: Slurry, wastewater, and high-viscosity fluid systems.
10. Pinch Valve
Pinch valves use a pinching mechanism to close off the flow in flexible tubing. They provide full bore flow and are highly resistant to wear.
Best for: Abrasive slurry, powder handling, and mining applications.
Back To The List btn

Related News

What Can Go Wrong When Check Valve Fails
25-July 2025

What Can Go Wrong When Check Valve Fails

Most of us don’t think twice about check valves—until something goes wrong. These small devices quietly keep your system flowing in the right direction. But when a check valve fails, the effects can ripple through your entire setup.So, what actually happens?

View Details
How To Choosing The Right Valve
24-July 2025

How To Choosing The Right Valve

In the world of industrial flow control, not all valves are created equal—and choosing the wrong one can lead to system inefficiencies, breakdowns, or worse. Whether you’re an engineer, contractor, or purchasing manager, knowing what to prioritize when selecting a valve can save you headaches down the road.

View Details
How To Replace Shut Off Valve
22-July 2025

How To Replace Shut Off Valve

It always happens at the worst time. A leaky toilet tank, a dripping faucet, or worse—an unexpected flood. You reach for the shut-off valve under the sink... and it doesn’t budge. Or worse, it breaks off in your hand.That’s when you realize: a small valve has big responsibilities. Replacing a shut-off valve may sound like a plumber’s job, but with a little preparation and a few tools, it’s a DIY-friendly task that can give you long-term peace of mind.

View Details
How To Choose Right Gate Valve
16-July 2025

How To Choose Right Gate Valve

Choosing a gate valve sounds simple—until you realize there are dozens of materials, designs, sizes, and standards out there. Don’t worry. Whether you’re a contractor, engineer, or project manager, this guide will walk you through what matters (and what doesn’t) when picking the perfect gate valve.

View Details
Where Should You Put Check Valve
15-July 2025

Where Should You Put Check Valve

If your pump shuts off and water suddenly rushes back, or your air compressor struggles to hold pressure, you’re likely missing one small—but mighty—device: a check valve.This simple valve only allows fluid to flow one way and automatically stops it from reversing. But it works best when it’s installed in the right place.

View Details
How Does Pneumatic Butterfly Valve Actually Work
14-July 2025

How Does Pneumatic Butterfly Valve Actually Work

Imagine you're managing a large water treatment plant. You can’t afford to run around opening and closing valves by hand. You need speed, reliability, and automation. That’s where pneumatic butterfly valves come in—a smart, air-powered solution for managing fluid flow.But how do they work behind the scenes?

View Details